Ways to Make Sure Your Packing Station Is Always Prepared for Work

When your packing station has an abundance of supplies, it’s less likely to be slowed down. One employee may have to wait until he finds the correct type of tape, opens a new case of boxes, or searches through his supply cabinet to locate the correct style of bag. All of these delays add up. Having your common packaging supplies readily available will enable your employees to complete orders as quickly as possible.

Begin by looking at your typical orders. Identify which boxes, bags, tapes, and fills you use daily. Design your workstation based upon this information. The items that are needed infrequently should remain on a nearby shelf. This provides ample space for all the frequently needed supplies your employees require.

Find a designated location for each of your supplies. Position the tape dispenser nearest the area where the boxes are being sealed. Set-up your label printer in a clean and dry environment. Locate your packing paper or bubble cushioning near the area where it will provide maximum accessibility. Provide enough space within your workstation to allow for the wrapping of merchandise and closing of each package.

Store flat boxes by size so that your employees can easily identify which one they need to use. Label each area with the box size. Store small boxes separate from larger ones. If you store boxes of different sizes together, your employees will be tempted to select a box that will either hold too much fill or will not accommodate the merchandise properly.

Identify a replenishment point for your primary packaging supplies. This is the quantity remaining at the time you should restock your supplies. For example, if you determine you always want two rolls of tape on hand at a given time, then you will know when you need to replace the second roll. Similarly, for boxes, you will know when it is time to purchase additional quantities prior to using all of the current boxes.

Place excess packaging supplies in a clean, dry area. Boxes can be stored on shelving units or pallets to prevent them from sitting on the floor. Bags and wrapping materials should be protected from dust. Do not pile heavy products on top of packaging supplies that could become bent or crushed. Inspect new packaging supplies as soon as they arrive at your facility to ensure none were damaged during shipping.

Check your packing station after each workday to ensure that it is prepared for the next workday. Replenish empty bins, dispose of trash and recyclables, and restore equipment to its proper home. Also check your tape dispensers to ensure there are no broken components or excessive buildup inside. A clean and organized workspace allows your employees to focus on packing merchandise efficiently while also making it easier for them to notice if something is missing.

Reevaluate your packing station arrangement whenever you introduce a new product into your inventory. That new product may necessitate a different width bag, thicker boxes, etc. Before purchasing large quantities of packaging supplies for the new product, create a test sample order to evaluate whether it fits in the desired packaging and determines how many materials per order you would typically need.

This entry was posted in Packaging Tricks. Bookmark the permalink.